Abstract
BACKGROUND: Alcohol-based hand sanitizers are becoming increasingly common in healthcare settings in an effort to control communicable bacteria, viruses and fungi of health significance. Much research has been done on the effectiveness of alcohol-based hand sanitizers but few studies look at the effectiveness when combined with more typical usage, such as varying application times and amounts. METHODS: We looked at the efficacy of the microbial killing power of an alcohol-based hand sanitizer when used in a series of 5 applications. ASTM E2755 was used with the modification of a shorter application time (8 seconds from the recommended 30 seconds) of the sanitizer to better reflect actual healthcare worker usage. RESULTS: We found an increase in the amount of indicator bacteria on the gloved hands of the subjects after repeated applications. However the increase was not significant enough in that a 2-log reduction of indicator bacteria was still achieved. Using a One Sample T-Test we found a very low probability value (<0.00000), indicating that the results were statistically significant. CONCLUSIONS: There is an increase of bacteria on gloved hands after repeated use of alcohol-based hand sanitizers. The results show a decrease in their effectiveness, most likely due to a buildup of various non-alcohol components in hand sanitizers. However even with the 8 second application time there was still a greater than two log reduction even after 5 serial contaminations and applications. This cautiously shows that there is significantly less danger posed by more common shorter application times than originally thought. These findings have a potential impact on hand hygiene education as other factors, such as frequency or sanitizer amounts can be safely emphasized over application times. Project submitted in partial fulfillment of the requirement for the degree of Bachelor of Technology in Environmental Health, British Columbia Institute of Technology, 2014.