Disinfection efficacy studies on three different disinfection methods in health care facilities by ATP method

Document
Contributors
Abstract
OBJECTIVES: Nosocomial infection has always been a significant topic in the field of public health. The disinfection procedures involved in health care facilities are extremely important to prevent potential transmission of diseases. Therefore, this study was performed to compare the disinfection efficacy between three different disinfection methods (Accel wipes, Hubscrub industrial washer, and Steam vapor) on three pieces of non-critical medical equipment: wheelchairs, mattresses and bath chairs. METHODS: The method used to evaluate the disinfection efficacy compared the reduction of contaminants count in the relative light unit using ATP monitoring methods. 30 samples of each of the three types of medical equipment were swabbed pre-disinfection and post-disinfection using the three disinfection methods. The recorded reduction number was then converted using log transformation. Statistical analysis was conducted using NCSS to assess differences between the disinfection methods. RESULTS: The mean log-reduction of disinfection for Accel wipes, Hubscrub, and steam vapor were 1.067, 1.490, and 1.485 respectively. Steam vapor and Hubscrub displayed statistically significantly better disinfection efficacy compared to Accel wipes in terms of log reduction (overall p=0.000002). CONCLUSION: Hubscrub and steam vapor are better disinfectants compared to Accel wipes in terms of mean log reduction values; however, all three disinfection methods demonstrated effectiveness when cleaning and disinfecting non-critical medical equipment. For critical medical equipment, steam vapor and Hubscrub industrial washing are effective while Accel wipes do not meet the standards of high-level disinfection. As a result, combination usages of all three disinfection methods are recommended at health care facilities based on the categories of the medical equipment. Project submitted in partial fulfillment of the requirement for the degree of Bachelor of Technology in Environmental Health, British Columbia Institute of Technology, 2015.

Refine your search

Note
Project submitted in partial fulfillment of the requirement for the degree of Bachelor of Technology in Environmental Health, British Columbia Institute of Technology, 2015.
Degree granted
Bachelor of Technology (BTech) in Environmental Health
Publisher
British Columbia Institute of Technology
Number of pages
20 pages
Type
Form
Language
Rights
This license enables reusers to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator. CC BY-NC-ND includes the following elements: BY: credit must be given to the creator. NC: Only noncommercial uses of the work are permitted. ND: No derivatives or adaptations of the work are permitted. https://creativecommons.org/licenses/by-nc-nd/4.0/