Abstract
OBJECTIVES: Cooking foods to a specific temperature and temperature control are often very difficult due to the frequent fluctuation of heat during the traditional dry heat (oven) cooking process. "Sous vide" cooking of vacuum-packaged foods immersed in water provides constant and controllable time and temperature measurements throughout the process. Some sous vide style foods are cooked at temperatures that are lower than 60°C for short periods of time. This presents a recognizable food safety concern including the survival of harmful bacteria as well as conditions that do not achieve pathogen reduction during either the sous vide cooking or finishing (searing) process. This research project investigated the time and temperature relationship for sous vide salmon in order to examine if pasteurization temperature was achieved if an additional searing step was performed. METHODS: Temperature values were measured using data-loggers (SmartButton) for 30 samples of vacuum-packed salmon and cooked sous vide inside a circulating water bath at 50°C for 20 minutes. A one sample one tailed t-test was conducted to assess whether the internal temperature of salmon reached instantaneous pasteurization temperature of 70°C after a final searing step was performed at 220°C for 45 seconds. RESULTS: Five out of the 30 (16.7%) salmon samples achieved 70°C after the final searing step. Statistical analyses were statistically significant, and the null hypothesis (Ho: measured internal temperature of salmon ≥ target temperature) was rejected with 100% power and a p-value of 0.00. CONCLUSION: These results indicate that salmon cooked sous vide style under 50°C for 20 minutes with a final searing step of 220°C for 45 seconds will likely not achieve pasteurization providing adequate pathogen reduction according to guidelines set out by BCCDC. For sous vide style cooked salmon cooked at lower temperatures for short periods, freezing for control of parasite hazards is recommended. Project submitted in partial fulfillment of the requirement for the degree of Bachelor of Technology in Environmental Health, British Columbia Institute of Technology, 2015.